How to maintain the dust removal equipment, before this, we have explained the consequences of industrial vacuum cleaners not paying attention to maintenance or using incorrect methods. Now we will introduce how to use and maintain the vacuum cleaner correctly.

1、 There are many kinds of dust removal equipment with different models, specifications, structural performance and functional characteristics. Before using, you need to read the manual carefully to avoid the damage of industrial vacuum cleaner and the safety of users.

2、 The ambient temperature of ordinary industrial vacuum cleaner should not exceed 40 degrees, the workplace should not be more than 1000 meters above sea level, there should be a good ventilation environment, the air should not have flammable, corrosive gas in the dry indoor environment.

3、 Dry dust removal equipment is not allowed to absorb water, wet hands can not operate the vacuum cleaner. If there are large paper balls, plastic sheets or waste materials larger than the diameter of the straw in the place to be cleaned, they should be removed in advance, otherwise the straw will be easily blocked. 6、 When the industrial vacuum cleaner sucks the liquid substance, it is necessary to remove the filter element, and pay attention to drain the liquid in time.

4、 Connect the ground wire to ensure the safety of electricity. The general industrial vacuum cleaner should work continuously for no more than 8 hours each time, mainly to prevent the motor from overheating and burning. Because of the special heat dissipation system, the industrial vacuum cleaner with special design can work continuously for 36 hours without shutdown, and can be used together with the machine tool.

5、 When using the industrial vacuum cleaner equipped with automatic winding device, pull out the power cord with enough length. Do not pull over the power cord. If you see the yellow or red mark on the power cord, you must stop pulling out immediately to prevent pulling over the power cord. If you need to roll back the power cord, press the button directly and it will retract automatically.

6、 Do not over extend and bend the hose of industrial vacuum cleaner or fold it frequently, which will affect the service life of hose of industrial vacuum cleaner.

7、 Check whether the power plug and power cord of the dust removal equipment are damaged, and the electric leakage will burn the motor of the industrial vacuum cleaner.

8、 Mobile dust removal equipment should pay attention not to be hit, to prevent the industrial vacuum cleaner barrel damage leakage, reduce the suction of industrial vacuum cleaner.

9、 When the machine is not in use, it should be placed in a ventilated and dry place. It does not support industrial vacuum cleaners that work continuously for a long time. The continuous working time should be controlled within the working time supported by industrial vacuum cleaners. Do not overload work, otherwise the service life of industrial vacuum cleaners will be affected.

10、 If the main engine of the dust removal equipment is hot and has scorching smell, or the industrial vacuum cleaner vibrates and sounds abnormally, stop the machine and send it for repair immediately. Do not overload the industrial vacuum cleaner.